Xinyang, Henan, China
Response Time: < 24h
Response Rate: 0%
Model No.: AW(S) | Place of Origin: China |
Main features:
•AW pneumatic actuator is divided into double-acting and single-acting (spring return), with two separate cylinders, large output torque and flexible balance.
• The inner wall of the cylinder and the piston shaft are plated with hard chromium, which has good wear resistance.
• All sliding parts are equipped with oil-free lubrication shafts and guide rings to reduce friction coefficient and extend service life.
•AW pneumatic actuator U curve characteristic output torque is more suitable for large diameter ball valves and butterfly valves.
• Rotation Angle: 90°±5°
• Use clean air as medium, high safety factor.
• Basic design: pneumatic double cylinder and double piston fork drive mechanism.
• Accessory functions: it can be equipped with single (double) electric solenoid valve, limit switch, air treatment FRL and manual operating mechanism, fully realizing automatic or manual control.
• use clean air as medium, high safety factor.
• accessory functions: it can be equipped with single (double) electric solenoid valve, limit switch, air source processing triplet and manual operating mechanism, fully realizing automatic or manual control.
Main parameters:
Working medium | Clean air filtered, dried, and fueled by mist. |
Working pressure | Double acting :0.3~0.8MPa |
Single acting:0.4~0.8MPa | |
Working temperature | Normal temperature(use NBR O ring)-20°C~+80°C |
Low temperature (use silicone rubber O ring)-40°C ~+80°C | |
High temperature(Use Viton rubber O ring)-20°C ~+180°C | |
Rotation angle | Standard type:0°~90°±5° |
Output torque | Double acting:0~175165N.m |
Air source interface | G1/4", G3/8", G3/4", G1" |