Xinyang, Henan, China
Response Time: < 24h
Response Rate: 0%
Model No.: GT52 | Place of Origin: China |
Main features:
GT series pneumatic actuators are divided into double-acting and single-acting (spring return).
• Angular stroke output to meet the needs of various commonly used low-torque rotary valves.
• The cylinder body is made of die-cast aluminum alloy (Aluminum alloy with hard anodic oxidation wear - resistant, anti - corrosion, long operating life).
• Bottom fixed hole for easy connection and alignment of actuator with valve, in accordance with ISO5211/DIN3337 standard.
• Using clean air as the medium, high safety factor.
• Basic design: Pneumatic double-piston rack and pinion drive mechanism.
• Powerful accessories: can be equipped with single (double) solenoid valve, limit switch, electric positioner, air treatment FRL and manual operation mechanism, fully realize automatic or manual control.
• External protection: corrosion resistance up to 500 hours of salt spray. Comply with ASTM B117 standard.
Main parameter:
Working medium | Clean air filtered, dried,and fueled by mist |
Working pressure | Double acting :0.2~0.8MPa |
Single acting:0.4~0.8MPa | |
Working temperature | Normal temperature(use NBR O ring)-20°C~+80°C |
Low temperature(use silicone rubber O ring)-40°C ~+80°C | |
High temperature(use viton rubber O ring)-20°C ~+180°C | |
Rotation angle | Standard:0°~90°±5° |
Non-standard:0°~180°±5° | |
Output torque | Double acting: 0~9139N.m |
Single acting :0~7553N.m | |
Air interface | G1/8", G1/4", G1/2" |